Note: To read off-line, try saving the file instead of opening it directly.

Left-click on the link to the PDF file (this may appear under Attachment).
A dialog box should appear. Choose the option to save the file.
Choose a location for the file on your hard disk, such as your Desktop, and save it.
Wait for the download to finish.
Go to the location that you chose in step 3 and open the file.

Download the latest version of Adobe Reader.

Readers who are interested in printing their X-Mitters are directed to http://pwa.freewebpages.org and instructed to use the following procedure.

1. Download the XMI_20xxxxPrint file to your computer.
2. Load your color printer with legal-size paper.
3. Open the file in Acrobat Reader.
4. Select your printer. Set the paper size to be legal (8.5 x 14).
5. Set the orientation to be landscape.
6. Print only the even pages.
7. Allow the pages to air dry for about 5 minutes.
8. Reload the paper to your printer to print on the alternate side.
9. Set up the printer to print in reverse order.
10. Print only the odd pages.
11. Fold the resulting document into a booklet format.
12. Find a stapler that will allow you to open it as if it was a staple gun.
13. Open the folded document with outside edge side up on a soft surface (a sheet of flat Styrofoam works best).
14. Drive a single staple into the center edge of the document.
15. Turn over the stapled document showing the pins of the staples pointing up.
16. Peen the staples over using a flat-blade screwdriver or teaspoon.